Ferrari/Maserati Full Line LED 3rd Brake Light – High-Brightness Rear Center Stop Lamp PN: ILUAL3BL
Ferrari/Maserati Full Line LED 3rd Brake Light – High-Brightness Rear Center Stop Lamp PN: ILUAL3BL
SKU:ILUAL3BL
Couldn't load pickup availability
Product Description
Scud Ing Swiss
Full Line LED 3rd Brake Light – High-Brightness Rear Center Stop Lamp Upgrade for Enhanced Visibility & Safety PN: ILUAL3BL
As for all our LED-based products, PN: ILUAL3BL also integrates a Super Fast constant current driver. We would never power LEDs directly from the car's power supply, as the voltage may vary significantly. Furthermore, a car's power supply contains lots of electrical noise and turbulence, which must be filtered before powering LEDs. The constant current driver will provide a perfect, stable LED light and will make them last almost forever.
Together with our LED tail light solutions, this new LED 3rd brake light will perfectly complete the rear of your car. Several clients found that this LED 3rd brake light integrates much better with the bodywork than the original one!
It will considerably increase your SAFETY thanks to a response time 50 times faster than the OEM incandescent lamps! A new filament lamp will take approximately 250 milliseconds to reach 90% of its asymptotic light output, causing potential delays in responses by following drivers. Aging lamps may have even a doubled response time.
In addition to that, our LED center stop light evenly illuminates the ENTIRE light cluster, with 200% more light than the stock 3rd brake light. Your safety is our first concern!
This is not just a simple light, but it integrates many advanced technologies and features, which make this product incomparable to the original 3rd brake light:
Total reaction time of less than 5 milliseconds
100% identical reaction time as our ILUAL LED Tail Light Packages
The entire light cluster is illuminated
Integrated Super Fast constant current driver
Complete heat-proof protection
Specific vibration-absorbent rubber washers
Optimized red transparent optical lens
The LED light system is almost invisible when not illuminated
High-quality full line of LED light systems
Identical red color to our ILUAL LED Tail Light Kits
Very long distance visible red color, but not blinding at short distances
Never have to change the small filament lamps anymore, often charged at a high price by your dealer, and well more than the price of this kit
Our integrated electronics make it compatible with F1 cars (no F1 failure light)
Our Ferrari LED 3rd brake light can be installed in place of the OEM light on the following Ferrari cars:
Maserati 4200 Spyder 2002+
Warning: for F1 cars on which aftermarket LED rear lights or LED lamps have been installed, which is not our LED rear lights package, you may have an F1 warning displayed on your dash when installing this FULL LINE LED 3RD BRAKE LIGHT. This is because such aftermarket LED rear lights do not integrate the needed features to avoid the F1 warning. In this case, you'll have to install our tool to avoid any F1 issues.
F-BRAKEFLASH OPTION - SAFETY BRAKE FLASHER ECU MODULE FOR CENTER BRAKE LIGHT - Version 3
In addition to this center LED Stop Light Cluster, please consider to completing it with our F-BrakeFlash Flasher ECU Module (please make your choice above when ordering): Directly connected to the center LED stop light (no specific installation required), this Smart ECU module will flash the center LED Stop Light when you brake to get more attention from drivers behind you and alert traffic to stop!
When the brake pedal is pressed, the center stop light will flash during the configured duration and at the configured speed (default 2 seconds - medium speed), then it will turn steady on. The duration of the flashes, as well as the flash speed, can easily be configured. It's also possible to set the module in continuous flash mode, which will make the center stop light flash as long as the brake pedal is pressed. It's now also possible to disable the ECU module, which will make the center stop light turn always steady on.
The device features a unique reactivation timing system to minimize the annoyance of brake light flashes when the brakes are used in heavy traffic. Your Ferrari LED third brake light will flash the configured number of times the first time the brake pedal is pressed, then the flashing effect is disabled if the brakes are pressed during the configured period of time (configurable between 4 and 20 seconds - default 10 seconds). In other words, the center stop light will flash each time the brake pedal is pressed for less than the configured timing; otherwise, it will turn steady on.
It also features a unique Pulsing mode (by default disabled). When activated, the brake light will flash between full and partial intensity. The brake light is never turned fully off but goes between fully ON and dimmed. Among 9 brightness levels can be configured.
With the provided switch, this ECU module can be easily configured, and it's now also possible to easily revert to the factory defaults.
Do you have questions or comments about this part?
Please don’t hesitate to contact our team of experts,
we are happy to support.