Lamborghini Gallardo and Superleggera Pre-LP E-Gear Clutch Rebuild – 07L105269F
Lamborghini Gallardo and Superleggera Pre-LP E-Gear Clutch Rebuild – 07L105269F
SKU:57662726662218
Couldn't load pickup availability
Specifications
Item Condition
Item Condition
Rebuild Service and Service provided
Part Number & Vendor
Part Number & Vendor
PN: 07L105269F, 07L105269C - Vendor: PEGA Clutch
Warranty
Warranty
"Proposition 65 Warnings"
"Proposition 65 Warnings"
Product Details
Lamborghini Gallardo and Superleggera Pre-LP E-Gear Clutch Rebuild
GTE Engineering rebuilds customer-supplied Lamborghini Gallardo and Superleggera Pre-LP E-Gear clutch assemblies using PEGA Clutch® friction linings. Reference 07L105269F identifies the application. This is a send-in rebuild service; inspection determines the condition of the supplied assembly and any additional work required.
Service format: Send your existing clutch for inspection and rebuilding. Select the available lining stage above.
Separate work: Flywheel service, additional balancing, release-bearing work, hydraulic or actuator testing, installation and vehicle calibration require their own selection or written estimate.
What the Rebuild Includes
| Operation | Service scope |
|---|---|
| Disassembly and inspection | Cleaning and checks for wear, heat damage and dimensional condition. |
| Reconditioning and linings | Recondition serviceable components and fit the selected PEGA friction material. Replacement pressure plates, intermediate plates, hubs and other hard parts depend on condition and the agreed estimate. |
| Assembly checks | Check release pressure and engagement characteristics before shipment. |
Work outside the selected rebuild scope is quoted for approval. Discuss the required assembly and any additional balancing service before shipping.
Available PEGA Clutch Stages
| Selected option | Friction material |
|---|---|
| Stage 1 | PEGA FX4C-SC Organic |
| Stage 2 | PEGA FX4C-SC Organic and BFXX Ceramic |
| Stage 3 | PEGA FXSS-SC Kevlar |
| Stage 4 | PEGA FXSS-SC Kevlar and BFXX Ceramic |
| Stage 5 | PEGA BFXX Ceramic — racing applications only |
Only the selectable options on this listing are offered. A general stage chart may show the wider PEGA range. Discuss road or track use and modifications when selecting the lining specification. No torque capacity or service-life guarantee is implied.
Application and Part Identification
For applicable pre-LP Gallardo and Superleggera E-Gear assemblies using 07L105269F. Eurospares lists 07L105269F as replacing 07L105269C. Manual-transmission assemblies and later LP E-Gear assembly 07L105269K require separate identification; the references are not presented as interchangeable.
| Reference | Identification |
|---|---|
| 07L105269F | Complete clutch/flywheel application reference for the pre-LP E-Gear service. |
| 07L105269C | Earlier catalogue reference superseded by 07L105269F; verify the installed assembly. |
Part selection responsibility: GTE Engineering does not provide VIN-to-part checks or fitment confirmations. The customer or sender is responsible for verifying part numbers, vehicle compatibility and the correct part before ordering or sending any component.
Gallery and Service Examples
The gallery uses a shared Gallardo E-Gear service-example photo showing a flywheel, lined disc and pressure plate. The image is not evidence that all Gallardo clutch versions interchange. Original identification photographs remain available where edited images cannot reproduce small markings exactly.
How the Send-In Service Works
- Verify your part. You or your installer must establish the correct assembly, part reference and transmission before placing the order.
- Select the stage and arrange shipping. Use the service quote form for scope, pressure-plate requirements, timing or shipping questions. Follow the shipping instructions and include your order information.
- Inspection and rebuilding. GTE identifies additional work requiring approval, rebuilds the agreed components and completes the assembly checks.
- Professional installation. Your installer completes fitting, adjustment and the applicable clutch calibration.
Core shipping address: GTE Engineering – Attn: PEGA Clutch, 67 Park Street, Orange, NJ 07050, USA. Confirm receiving arrangements before shipment.
Common Questions
Is a new clutch or flywheel supplied?
This listing rebuilds your supplied clutch. A replacement pressure plate, flywheel work or other additional parts are included only when specified in your selection or written estimate.
Will this repair every shifting fault?
The rebuild addresses the submitted clutch assembly. Hydraulic faults, actuator problems, installation issues and calibration requirements need separate diagnosis.
What warranty applies?
See Warranty and Rebuild Coverage for the applicable craftsmanship coverage, installation requirements, conditions and exclusions.
Technical Resources and Service Support
PEGA Clutch rebuilding and performance stages · F1 and E-Gear clutch installation guide · All rebuild and product guides
Do you have questions or comments about this part?
Please don’t hesitate to contact our team of experts,
we are happy to support.
Parts, Rebuilds & Installation — All In-House
Buying a rebuild? Need it installed or serviced? Our NJ workshop handles full installation, calibration, and complete clutch & transmission solutions.
Book a Service
